Hayati Pro Max Plus 6K Not Working? Here’s How to Fix It

The Hayati Pro Max Plus 6K is a popular prefilled pod kit in the UK, but like any vape device, it can sometimes stop working the way you expect. You might notice no vapour on inhale, the device not charging, weak vapour, muted flavour, burnt taste, or even leaking from the pod.

Don’t worry – most Hayati Pro Max Plus 6K not working problems are common and can often be fixed with a few simple checks. In this guide, we’ll go through the most frequent Hayati Pro Max Plus issues step by step, so you can quickly work out what’s wrong and how to put it right.

If your Hayati vape turns out to be faulty beyond repair, you can always pick up a fresh Hayati device or an alternative pod kit from our store to keep you vaping without hassle.

Quick Checklist Before You Start

Before you try any fixes, run through this quick checklist to rule out the simplest causes of your Hayati Pro Max Plus 6K not working. These basic checks often solve issues like no vapour, weak flavour, or the device not firing.

Check the battery level

A low or empty battery can cause weak vapour, muted flavour, or the device not responding at all.

Ensure the pod is properly inserted

Sometimes the pod isn’t fully clicked into place, which can cause pod not detected, no vapour, or LED flashing errors.

Remove any stickers or airflow plugs from a new pod

New prefilled pods sometimes come with small seals that block airflow or prevent proper contact.

Check for visible leaks or damage

Leaking, gurgling, or e-liquid on the contacts can interrupt the connection between the pod and device.

Confirm you’re using original Hayati pods

Non-original or incompatible pods can cause weak vapour, burnt taste, LED errors, or the device failing to fire.

Once you’ve checked these basic steps, you’re ready to move on to the full troubleshooting guide. If you need replacement Hayati pods, compatible products, or a new device, feel free to explore our store anytime.

1. Hayati Pro Max Plus 6K Not Firing (No Vapour on Inhale)

If your Hayati Pro Max Plus 6K isn’t producing vapour when you inhale, don’t panic — this is one of the most common issues users face. The problem is usually caused by something small, and most of the time it can be fixed in a minute or two.

Why This Happens

Here are the most common reasons your Hayati Pro Max Plus 6K might not be firing or giving no vapour on inhale:

• Flat battery
   A low or empty battery means the device doesn’t have enough power to activate the coil.
  

• Pod not fully seated / bad contact
  If the pod isn’t clicked in properly, the device can’t detect it, leading to no vapour or flashing LED errors.
  

• Airflow sensor blocked (lint, dust, or liquid)
  The auto-draw sensor can become blocked, stopping the device from activating when you inhale.
  

• Coil inside the pod is burnt or dead
   A burnt or faulty coil will produce zero vapour or a harsh burnt taste.
  

• Device reached puff limit / end of life
   Disposable-style devices eventually run out — if the puff count is exhausted, it will stop firing completely.
  

Step-by-Step Fix

Try these steps one by one to get your device working again:

Step 1: Try gentle puffs, not overly hard pulls

Hard, forceful inhales can confuse the airflow sensor or flood the coil. Take slow, gentle drags to activate the device properly.

Step 2: Remove the pod and wipe the contacts with a dry tissue

Moisture, dust, or small leaks can block the connection. Cleaning the contacts often fixes no vapour instantly.

Step 3: Reinsert the pod firmly until it clicks

Make sure the pod sits flush and secure — this helps the device detect it correctly.

Step 4: Try a few short puffs to activate the sensor

Short, controlled pulls help re-engage the airflow sensor if it has been stuck or unresponsive.

Step 5: If the LED doesn’t light at all

If there’s no LED indication, the battery may be fully dead or the internal chip has failed.
At this point, the device is likely at its end of life, and replacing it is the best option.

Note: Avoid very hard inhaling — it can accidentally flood the coil, causing gurgling and weak vapour later on.

If the issue continues even after these steps, it may be time to pick up a fresh Hayati device or consider an alternative prefilled pod kit from our store.

2. Hayati Pro Max Plus 6K Not Charging

If your Hayati Pro Max Plus 6K isn’t charging, the good news is that this is usually caused by a simple issue like a cable problem or dust in the charging port. Because the device uses a USB-C charging port, even a tiny blockage or faulty cable can stop it from powering up.

Let’s break down the most common causes and the easiest ways to fix them.

Common Causes

Here’s why your Hayati Pro Max Plus 6K might not be charging:

• Faulty USB-C cable or adapter
  Some cables only support power for low-output devices, or they may become loose/damaged over time. Old phone chargers and cheap cables often fail to charge vape devices properly.
  
  

• Dust or debris in the charging port
  Pocket fluff, dust, or dried e-liquid inside the port can block the connection completely.
  
  

• Over-discharged or damaged battery
  If the battery has dropped too low or become damaged, the device may not respond to charging at all.
  
  

• Using very low-power adapters (e.g., old phone plugs)
   Low-wattage plugs can cause slow or failed charging. The device may not recognise extremely weak power sources.
  

How to Fix It

Try these steps in order to solve Hayati Pro Max Plus not charging issues:

1. Try a different USB-C cable and wall plug

Swap both the cable and the adapter.
Avoid laptop USB ports — use a proper wall charger for a stable power supply.

2. Inspect and gently clean the charging port

Use a dry cotton bud or wooden toothpick to remove dust or debris.
Make sure the port is 100% dry before trying to charge again.

3. Leave it on charge for 20–30 minutes, then test

Sometimes an over-discharged battery needs a short period before it wakes up and shows any LED response.

4. If the device still doesn’t respond

If there’s no LED, no warmth, and no signs of life, the internal battery or circuit board is likely damaged.
In this case, replacing the device is the safest and fastest option.

3. Weak Vapour or Muted Flavour

If your Hayati Pro Max Plus 6K is producing weak vapour, muted flavour, or feels less satisfying than usual, this is a very common issue with prefilled pod kits — especially when they’ve been used for a while. The good news is that most of the time, this problem is caused by something simple, and it’s usually easy to fix without replacing the whole device.

Weak vapour can make your vape feel dull, bland, or underpowered, but with a few checks and adjustments, you can often bring it back to normal performance.

Why Vapour Feels Weak

Here are the main reasons why your Hayati Pro Max Plus 6K might suddenly feel weak or muted:

Low battery output

As the battery runs low, it doesn’t deliver enough power to heat the coil properly. This results in thin vapour and dull flavour. Even if the device still lights up, performance can drop significantly at low battery levels.

Coil nearing end of life

In prefilled pods, the coil gradually wears out with use. Once the coil is old or the wick becomes saturated with residue, vapour production decreases and the flavour becomes muted or flat.

Chain vaping overheating the coil

Taking too many puffs in a short period can cause heat build-up in the coil. When this happens, the wick inside the pod can’t reabsorb liquid fast enough, causing weak vapour and dry-feeling hits.

Airflow partially blocked

Dust, pocket lint, or condensation can build up inside the mouthpiece or airflow holes, reducing the amount of air reaching the coil — which weakens vapour output and changes the flavour.

Inhaling too softly or too hard

Auto-draw devices like the Hayati Pro Max Plus 6K rely on airflow pressure to activate the sensor.
• Inhaling too softly may not trigger the coil.
• Pulling too hard can pull liquid away from the coil, reducing vapour and causing gurgling.

Step-by-Step Fix

Follow these steps to restore full vapour production:

1. Fully charge the device

A weak battery is the number one cause of poor vapour. Put your device on a stable USB-C charger until it reaches full power. Once charged, you should notice stronger performance immediately.

2. Check the mouthpiece and airflow for blockages

Remove the pod and inspect the mouthpiece and the airflow openings.
Look for:

• Dust
  
• Condensation
  
• Small leaks
  
• Debris
  

Wipe the pod gently with a dry tissue and make sure no liquid is blocking the airflow.

3. Take slower, longer puffs instead of rapid chain hits

Allow 5–10 seconds between puffs to give the wick time to re-saturate with e-liquid. Slower, steady inhales help the sensor activate properly and heat the coil more evenly, producing fuller vapour and richer flavour.

4. Replace the pod if it’s old or nearly empty

If your pod has been used heavily, is running low on liquid, or the flavour feels dull even after cleaning and charging, the coil is likely worn out.
Because Hayati pods are prefilled, you can’t replace the coil — so switching to a fresh pod is the only fix.

If you’ve tried all these steps and your Hayati Pro Max Plus 6K still feels weak, it may be at the end of its lifespan. In that case, picking up a fresh Hayati pod, a compatible flavour, or even an alternative prefilled pod kit from our store is the easiest way to get back to a smooth and satisfying vape.

4. Burnt or Harsh Taste

Experiencing a burnt or harsh taste from your Hayati Pro Max Plus 6K is one of the most unpleasant issues you can run into. Once a pod tastes burnt, it usually means the coil or wick inside the pod has been damaged — and unfortunately, it won’t recover. Still, understanding why it happens can help you prevent it in the future and keep your device tasting fresh for longer.

A burnt hit can feel hot, dry, scratchy, or bitter, and if ignored, it can make the entire pod unusable. Here’s what causes it and how you can avoid it.

What Causes Burnt Hits

These are the most common reasons your Hayati Pro Max Plus 6K may suddenly taste burnt or harsh:

• Coil is burnt out
  Over time, the coil inside a prefilled pod naturally wears out. Once it burns, the wick is permanently damaged, causing that harsh burnt taste with every puff.
  

• Vaping when the liquid is low or finished
   If the pod is running low on e-liquid, the cotton wick can dry out. When the coil heats up with little or no liquid, the wick burns — leading to an instant burnt flavour.
  

• Chain vaping without allowing the wick to re-saturate
   Taking repeated puffs too quickly doesn’t give the cotton wick enough time to soak up more liquid. This creates dry patches in the wick, which burn easily during rapid puffs.
  

• Inhaling too hard, pulling liquid away from the coil
   Strong, forceful inhales can pull the e-liquid away from the heating coil. This causes the cotton to dry and burn, leading to a harsh and unpleasant taste.
  

How to Fix / Prevent Burnt Taste

Once a pod tastes burnt, there’s no way to reverse the damage. But you can prevent it from happening again with the following steps:

1. Stop using the pod immediately if it tastes burnt

Continuing to vape on a burnt coil will only make the flavour worse and can be irritating to your throat.

2. Replace the pod – burnt taste does not “go away”

A burnt coil cannot be repaired or flushed out.
With the Hayati Pro Max Plus 6K, the coil is built into the pod, so replacing the pod is the only solution.

3. Leave a fresh pod to sit for a few minutes before using it

When you insert a brand-new pod, give it a few minutes for the wick to fully absorb the e-liquid. This helps prevent early dry hits and protects the coil from burning prematurely.

4. Take shorter puffs and allow a few seconds between pulls

Give the wick time to re-saturate between inhales.
 Shorter, slower drags help the coil heat evenly and improve flavour, while reducing the risk of dry or burnt hits.

A burnt taste is one of the clearest signs that your pod has reached the end of its life. If this happens often, switching to a fresh Hayati pod or trying an alternative prefilled pod kit from our store can help you enjoy smoother, cleaner flavour with every puff.

5. Leaking or Gurgling

If your Hayati 6K is leaking, spitting, or making a gurgling sound when you inhale, you’re not alone. This is a common issue with many prefilled pod kits, and while it can be messy or unpleasant, it’s usually easy to fix.
Leaking happens when excess e-liquid escapes the pod chamber, while gurgling occurs when too much liquid reaches the coil or airflow channel.

Understanding the causes will help you prevent leaks and keep your device performing smoothly.

Why the Pod Leaks

Here are the most common reasons your Hayati Pro Max Plus 6K pod may start leaking or gurgling:

• Condensation build-up in the chimney
   With regular use, small droplets of condensation form inside the mouthpiece and airflow chamber. Over time, this moisture can collect and create gurgling or mild leaking.
  

• Over-inhaling causing flooding
   If you inhale too hard, you may draw excess e-liquid into the coil area. This floods the coil, causing gurgling, spit-back, or light leaking around the bottom of the pod.
  

• Damage from drops or pressure (pocket, car, heat)
   Heat exposure (like leaving your device in the car), tight pockets, or accidental drops can cause internal pressure changes that push liquid out of the pod.
  

• Manufacturing defect in the pod
   While rare, a faulty pod with loose seals or poor coil installation can leak right out of the package.
  

Easy Fixes

Try these simple steps to stop Hayati Pro Max Plus 6K leaking or gurgling issues:

1. Remove the pod and gently blow through the mouthpiece into a tissue

This clears any excess liquid trapped inside the chimney and coil area.
Be gentle — you’re clearing condensation, not forcing liquid out aggressively.

2. Wipe the pod contacts and inside of the device

Use a dry tissue or cotton swab to clean any e-liquid around the metal contacts.
A clean connection helps prevent misfires, LED errors, and further leaks.

3. Avoid storing the device horizontally or in hot places

Heat can thin the liquid and increase pressure inside the pod, leading to leaks.
Try to keep your vape upright and away from:

• direct sunlight
  
• glove compartments
  
• warm pockets
  

4. If the leak is heavy or constant → replace the pod

A persistent or large leak usually means the pod itself is damaged or faulty.
Because the Hayati Pro Max Plus 6K uses prefilled pods, replacing the pod is the quickest and safest solution.

6. Pod Not Detected / LED Error Flashes

If your Hayati Pro Max Plus 6K is showing LED error flashes or displaying a “pod not detected” problem, it usually means the device isn’t able to make a proper connection with the pod. This can stop the vape from firing, even if everything looks normal on the outside.
These issues are common with prefilled pod kits, and most of the time they can be fixed in seconds with a quick clean or a simple pod adjustment.

Common Reasons

Here’s why your Hayati Pro Max Plus 6K may not detect the pod or may flash its LED:

• Dirty or wet contacts
   E-liquid residue, condensation, or dust on the gold contacts interferes with the connection, causing the device to misread or not recognise the pod.
  

• Pod not fully clicked in
   Sometimes the pod looks inserted but isn’t completely locked in. Even a slight gap can trigger an LED error or stop the device from firing.
  

• Non-compatible pod
  Using pods not designed for the Hayati Pro Max Plus 6K can cause detection problems or flashing LED warnings.
  

• Internal chip error
   If the internal circuitry has been damaged by liquid, drops, or general wear, the device may flash repeatedly and refuse to work.
  

What to Do

Follow these steps to fix pod not detected and LED flashing issues:

1. Remove the pod and wipe the gold contacts on both the pod and device

 Use a dry tissue or cotton swab to remove any moisture, dust, or e-liquid.
A clean contact often solves the issue instantly.

2. Reinsert the pod firmly until it clicks

Make sure the pod sits tight and flush.
A secure fit helps the device detect the pod properly and stops LED flashing.

3. Try a new pod to rule out a pod-related issue

If the problem continues, the original pod may have a damaged coil or faulty connector.
Testing a fresh pod helps you identify whether the issue is with the pod or the device itself.

4. If the LED keeps flashing and there’s still no vapour

This usually indicates a faulty device, internal chip issue, or end-of-life battery.
At this point, replacing the device is the only reliable solution.

Optional: LED Flash Patterns (Helpful for Users)

You can include this table in your blog if you want to add extra value:

7. Auto-Firing or Device Heating Up

When your Hayati Pro Max starts auto-firing (activating by itself) or becomes unusually hot, this is more than just a performance problem — it’s a safety risk.
Auto-firing means the device is activating without you inhaling, which can quickly overheat the coil, damage the internal battery, or in rare cases become a fire hazard.
Because of this, it’s important to treat these symptoms seriously and stop using the device immediately.

⚠️ Safety Note

If your vape auto-fires, overheats, or continues firing on its own, stop using it immediately. Safety comes first.

Causes

These are the most common reasons the Hayati Pro Max Plus 6K may auto-fire or heat up unexpectedly:

• Stuck or over-sensitive auto-draw sensor
  The device uses an airflow sensor to detect when you inhale.
   If the sensor gets stuck, becomes overly sensitive, or gets triggered by airflow changes, the vape may fire without you pulling on it.
  

• Internal short circuit from liquid ingress
  If e-liquid leaks into the internal circuitry, it can cause a short circuit.
   This may lead to continuous firing, overheating, or unpredictable LED flashes.
  

• Faulty chip or damaged device
  Drops, impact, internal wiring faults, or manufacturing defects can cause the device’s chip to malfunction.
   This is especially common in older disposable-style devices nearing the end of their life.
  

Immediate Actions

Because auto-firing poses a safety risk, follow these steps as soon as the issue occurs:

1. Remove the pod immediately

This disconnects the coil so the device can’t continue heating the liquid.
If the pod is the cause of the malfunction (leaks or faulty design), removing it will usually stop the auto-firing.

2. If the device is still heating or firing, place it somewhere non-flammable

Put it down on a fireproof or safe surface such as:

• tiled floor
  
• metal tray
  
• countertop (away from fabrics)
  

Do not hold the device if it’s heating up.
Let it cool down naturally and avoid touching the hot areas.

3. Do not try to charge a device that has overheated

Charging a malfunctioning or overheated device can make the issue worse and may damage the battery further.
Never plug in a vape that is behaving abnormally.

4. Safely dispose of or replace the device

If the problem continues after removing the pod, the device is faulty and should not be used again.
Auto-firing is a sign of a serious internal issue that cannot be repaired in a disposable-style device like the Hayati Pro Max Plus 6K.

8. Airflow Too Tight or Too Loose

If your Hayati Pro Max Plus 6K suddenly feels too tight to inhale or unusually loose and airy, it can affect both flavour and vapour production. Airflow plays a big role in how satisfying your vape feels, and even small changes can make a noticeable difference.

The good news is that airflow issues are usually caused by simple factors like condensation, pod variations, or the way the device is held — all of which are easy to fix.

Why This Happens

Here are the most common reasons your device’s airflow may feel tighter or looser than normal:

• Condensation or debris in the airflow
   Over time, tiny droplets of condensation or bits of pocket lint can gather around the airflow holes or mouthpiece. This restricts airflow and can make pulls feel tighter and less smooth.
  

• Pod design differences / manufacturing tolerances
  Even with high-quality pods, small variations in airflow channels or the coil housing can lead to slightly different airflow feels from pod to pod. One pod might feel tight, while the next one feels looser — this is normal across most prefilled pod kits.
  

• User expectations coming from different devices
  If you switched from another brand or from a disposable vape, the airflow style of the Hayati Pro Max Plus 6K may feel different. Some users prefer a tighter MTL draw, while others like a smooth, airy inhale.
  

How to Improve Airflow

Try the steps below to fix or fine-tune your airflow:

1. Clean the mouthpiece and visible airflow holes

Remove the pod and inspect the airflow openings.
Wipe away condensation, dust, or any small debris with a dry tissue or cotton swab.
This alone can dramatically improve airflow.

2. Adjust the way you grip the device

Make sure you’re not accidentally covering the airflow holes with your fingers while vaping.
Blocking them even slightly can make the draw feel extremely tight.

3. Try a new pod — sometimes a different pod feels better

Because of small manufacturing differences, some pods naturally feel tighter or looser.
Switching to a fresh Hayati pod often restores the perfect draw resistance.

4. If airflow is consistently too tight or too loose for your preference

Consider switching to a device with adjustable airflow, especially if you like customizing how your vape feels.

9. Battery Draining Faster Than Expected

If your Hayati Pro Plus 6K seems to be losing battery faster than normal, it can be frustrating — especially if you expect it to last all day. While this device is designed for long-lasting performance, several factors can affect battery life, including usage style, temperature, and the natural lifespan of the internal battery.

Let’s break down what’s considered normal battery behaviour and what may indicate a deeper issue.

Normal vs Not Normal

Here’s how to understand whether your battery drain is expected or a sign of a problem:

• Puff count is an estimate and depends on puff length
  The advertised puff count (e.g., 6000 puffs) assumes short, gentle puffs.
   If you take longer or deeper inhales, each puff uses more power and more e-liquid, making the battery drain faster than expected.
  

• Chain vaping or high-frequency use = faster drain
  Frequent back-to-back pulls heat the coil repeatedly, requiring more power.
   Heavy users may notice the battery draining noticeably quicker throughout the day.
  

• Older units / battery degradation
  Like all rechargeable devices, the internal battery naturally weakens over time.
  If you’ve been using your Hayati Pro Max Plus 6K for a long period, the battery may no longer hold charge as well as it used to.
  
  

Tips to Maximise Battery Life

If your device still turns on and charges normally but feels like it’s draining too quickly, try these simple tips to extend its battery life:

1. Avoid constant chain vaping

Give the device a few seconds between puffs.
This lowers the power demand and prevents the coil from overheating, which can drain the battery faster.

2. Store the device at room temperature

Batteries perform best in moderate temperatures.
Keeping your vape indoors or in a bag — rather than in a car or coat pocket — helps maintain battery health.

3. Don’t leave the device in very hot or very cold environments

Extreme temperatures can stress the battery, reduce lifespan, and cause rapid power loss.
Avoid leaving it in:

• hot cars
  
• direct sunlight
  
• freezing weather
  

4. If the device barely lasts a few hours with light use → it’s likely time for a replacement

If your Hayati Pro Max Plus 6K drains extremely fast even with gentle use, the internal battery may be worn out or damaged.
Because it’s a prefilled pod kit and not designed for battery replacement, the only reliable solution is to replace the device.

If your vape can no longer hold a charge or drains faster than you can use it, picking up a fresh Hayati device or choosing a different prefilled pod kit from our store will give you a much smoother, longer-lasting experience.

10. Flavour Tastes Mixed After Switching (Dual-Flavour Pods)

If you’re using a Hayati Pro Max Plus 6K dual-flavour pod and notice that the flavour tastes mixed, muddy, or not as clean as expected when switching between the two flavours, you’re not alone.
Dual-flavour pods are designed to offer more variety, but the way the coil and wick work can sometimes cause flavours to overlap — especially when switching quickly.

This is completely normal with dual-flavour prefilled pod kits, and there are simple ways to reduce or fix the issue.

Why This Happens

Here are the main reasons your flavour tastes mixed when switching:

• Dual-flavour design = two flavours in the same pod
   While each side of the pod contains a different flavour, both flavours still travel through the same coil and chimney. This naturally causes a bit of blending when switching between them.
  

• Residue from the previous flavour sticks to the coil/wick
  The wick absorbs leftover flavour, and it takes a few puffs for the new flavour to fully take over.
   This is why the first few inhales often taste like a mix of both flavours.
  

• Switching too quickly between flavours
  If you switch flavours back and forth without giving the coil time to adjust, the two flavours can blend and create a muddy or confusing taste.
  
  

How to Get Cleaner Flavour

Here’s how to get the best results when switching flavours on a dual-flavour Hayati pod:

1. Give several puffs after switching to let the new flavour take over

 It usually takes 3–6 puffs for the wick to fully absorb the new flavour and clear out the previous one.
This helps the new flavour taste clean and accurate.

2. If the flavour still tastes muddy or unpleasant → replace the pod

If you’ve tried multiple puffs and the flavour remains dull, mixed, or strange, the coil may be saturated with leftover flavour or nearing the end of its life.
Replacing the pod is the quickest fix.

3. For the cleanest, purest flavour, consider single-flavour pods or separate devices

If you prefer sharp, accurate flavour profiles, single-flavour pods usually offer a cleaner taste experience.
Using separate devices for each flavour also ensures zero cross-flavour mixing.

If mixed flavours are affecting your enjoyment, you can explore our range of single-flavour Hayati pods or other prefilled pod kits for a smoother, cleaner vaping experience.

When to Replace Your Hayati Pro Max Plus 6K Completely

Even with the best care, every prefilled pod kit including the Hayati Pro Max Plus 6K has a finite lifespan. Knowing when it’s time to retire it and upgrade is key to staying safe and enjoying the best vape experience.
Here are the clear signs that your device should be replaced — not just the pod.

Replacement Checklist

Replace your device if you experience any of the following:

• No LED / no response even after charging
   If the LED doesn’t light up and the device doesn’t respond or fire even after a full charge and multiple fresh pods, it’s likely the battery or internal chip has failed.
  

• Severe leaking, burnt smell, or overheating
   Leaks that become heavy, a burnt odour that persists, or the device becoming hot to the touch are signs of serious damage or failure. For safety, stop using immediately.
  

• Multiple pods not detected
   If you’ve tried several new pods and the device keeps showing “pod not detected”, flashing the LED, or refusing to fire, the fault is almost certainly in the device, not the pods.
  

• Device has been dropped in water or suffered serious damage
  Liquid damage, major impact, or ingress of moisture can impair internal electronics irreparably. These issues often cause unpredictable behaviour or failure.

FAQs – Hayati Pro Max Plus 6K Not Working

Here are some quick answers to the most common questions users have when their Hayati Pro Max Plus 6K stops working, hits weak, or shows unusual behaviour. These FAQs target real search queries and help troubleshoot problems faster.

1. Why is my Hayati Pro Max Plus 6K not hitting?

Your device may not be hitting due to a low battery, dirty contacts, a flooded coil, or a pod not fully inserted.
Try cleaning the contacts, reinserting the pod, and taking gentle puffs.
If there’s no vapour and no LED, the device may be at the end of its life.

2. Can I recharge my Hayati Pro 6K safely?

Yes — as long as you use a proper USB-C cable and a safe, low-wattage wall plug (not a fast charger).
Never charge the device if it’s overheating, leaking, or showing LED error flashes.
If it doesn’t respond after charging attempts, the battery is likely damaged.

3. How long should a Hayati Pro Max Plus 6K last?

Most users get several days to a couple of weeks of use, depending on puff length, frequency, and battery care.
Higher usage and longer puffs will shorten its lifespan.
Once the coil is burnt or the battery stops holding charge, it’s time to replace the device.

4. Why does my Hayati taste burnt all of a sudden?

A sudden burnt taste usually means the coil has dried out, the pod is nearly empty, or the coil has burnt out from chain vaping.
Once burnt, the flavour won’t recover — you’ll need to replace the pod to fix it.

5. Is it safe to use a leaking Hayati vape?

Minor condensation is normal, but heavy leaking can cause auto-firing, LED errors, or internal damage.
If the leak is persistent or severe, stop using the device and replace the pod.
Never continue using a device that is overheating or flooded with e-liquid.