The HQD Air Glow 70k is a next-generation pod vape kit built for endurance and convenience. With an impressive 70,000 puff capacity, a powerful rechargeable battery, and an easy-to-use twist pod system, it’s designed to deliver long-lasting performance without constant replacements. Unlike disposable vapes, the HQD Air Glow is a refillable pod device that combines flavour variety with cost savings, making it one of the most advanced choices on the market.
This device is ideal for:
- Beginners who want a simple, hassle-free vaping setup.
- Heavy vapers looking for a high-capacity kit that can keep up with daily use.
- Ex-disposable vape users ready to switch to something more sustainable and durable.
In this step-by-step guide, you’ll learn everything you need to get started, including:
- How to unbox and prepare your HQD Air Glow 70k
- How to charge the battery safely using the USB-C port
- How to insert, refill, or replace pods properly
- How to switch flavours with the twist pod mechanism
- Tips for safe vaping, maintenance, and troubleshooting
By the end, you’ll know exactly how to set up and enjoy your HQD Air Glow 70k vape kit for a smooth, flavour-rich experience.
Step-by-Step Guide: How to Use HQD Air Glow 70k
The HQD Air Glow 70k vape kit is designed to be simple enough for beginners while still powerful enough for heavy users. Follow these steps to set up and start enjoying your device.
Step 1: Unboxing & Preparation
-
Remove all protective seals and packaging.
-
Inspect the HQD Air Glow device and pod for any visible damage.
-
Locate the USB-C charging port (usually at the bottom) and the LED indicator light that shows battery status.
Keep the user manual handy in case you need quick troubleshooting later.
Step 2: Charging the Device
-
Connect the included USB-C charging cable to the device.
-
Plug the other end into a safe power source (wall adapter, laptop, or power bank).
-
The LED indicator will light up or pulse to show charging progress.
-
A full charge usually takes 45–60 minutes, depending on the battery’s starting level.
-
Once fully charged, unplug the device to protect the battery health.
Step 3: Inserting the Pod
-
Take the HQD Air Glow 70k pod out of its packaging.
-
Align the pod with the magnetic connectors inside the device.
-
Push it gently until it clicks into place.
-
Allow the pod to rest for a few minutes so the coil and wick can absorb the e-liquid (this helps prevent dry hits).
Step 4: Switching Flavours (Twist Pod Mechanism)
-
One of the best features of the HQD Air Glow 70k pod system is the twist-to-switch pod mechanism.
-
Gently twist the mouthpiece clockwise or anti-clockwise to switch flavours.
-
The system allows you to enjoy multiple flavours in a single device without swapping pods.
-
After switching, take a test puff to confirm the flavour change.
Step 5: Start Vaping
-
Place the mouthpiece between your lips.
-
Inhale slowly and steadily—the draw-activated firing system will automatically produce vapour (no buttons needed).
-
Exhale and enjoy smooth, flavourful clouds.
For the best results, avoid short, sharp puffs—steady draws enhance both vapour production and flavour delivery.
Step 6: Refilling or Replacing Pods
-
Keep an eye on the transparent pod reservoir to monitor e-liquid levels.
-
If the pod looks empty or flavour feels weak or burnt, it’s time to refill or replace it.
-
To refill: open the filling port, add e-liquid carefully (preferably 50/50 VG/PG nicotine salt), then close tightly.
-
To replace: remove the old pod and insert a new one until it clicks.
That’s it! Your HQD Air Glow 70k vape kit is now ready to deliver long-lasting performance, rich flavours, and up to 70,000 puffs of smooth satisfaction.
Maintenance & Safety Tips for HQD Air Glow 70k
Taking care of your HQD 70k vape kit ensures better performance, longer battery life, and consistent flavour. The good news is, it doesn’t require much effort—just a few simple habits.
First, always keep the device clean and dry. Wipe the mouthpiece and the pod connection area regularly with a soft cloth. If you notice any e-liquid around the magnetic connectors or USB-C port, clean it immediately to prevent short circuits or poor performance.
When it comes to pods, stick to original HQD Air Glow pods only. Using fake or low-quality pods may cause leaks, weak vapour, or burnt taste, and could even damage your device.
Charging habits also matter. Use the provided USB-C cable or another certified cable, and avoid leaving the device plugged in overnight. Once the LED indicator light shows the battery is full, unplug it to protect the battery health.
Storage is another key factor. To keep your vape in top condition:
- Store it in a cool, dry place, away from direct sunlight or extreme temperatures.
- Keep pods upright when not in use to avoid leaks.
- If you carry the device in a pocket or bag, use a protective case to prevent scratches or accidental activation.
Finally, avoid overfilling your pod. If you’re refilling, add e-liquid slowly and stop once the chamber is about 80% full—this prevents flooding and ensures the coil and wick work properly.
With these simple maintenance and safety tips, your HQD Air 70k will deliver smoother draws, consistent flavour, and a much longer lifespan.
We reviewed the HQD air glow 70k in very details, you can check it out here.
Common Issues & Troubleshooting of HQD Air Glow 70k vape kit
Device not charging
If your HQD Air Glow 70k doesn’t respond when you plug it in, start with the basics. The goal is to rule out cable, charger, and port issues before assuming a device fault.
What to do (step-by-step):
-
Inspect the USB-C charging cable for kinks or loose tips; try a second, certified cable if you have one.
-
Plug into a reliable power adapter (5V/1–2A). Avoid ultra-fast phone bricks that can cause unstable voltage.
-
Gently clear dust from the USB-C port with a dry cotton swab—moisture or lint can block contact.
-
Watch the LED indicator light: steady/pulsing = charging; no light = connection issue.
-
Let the device cool if it feels warm, then retry—battery protection may pause charging when hot.
-
If the LED still won’t show, remove the pod, wait 60 seconds, reinsert, and try charging again.
-
Persistent failure after these checks usually points to a battery/board fault—contact the retailer.
No vapour on inhale
No vapour usually means poor pod connection, empty pod, or blocked airflow.
Fix it fast:
-
Remove the pod and reinsert until you feel the magnetic connectors pull and a firm click.
-
Check e-liquid level in the transparent pod reservoir; if low or empty, refill or replace the pod.
-
After refilling, let the coil and wick soak for 5–10 minutes (priming prevents dry hits).
-
Gently twist the airflow/twist-to-switch mechanism to ensure the airway isn’t fully closed.
-
Take a long, steady draw (the draw-activated firing system needs a smooth inhale to trigger).
Weak vapour or muted flavour
This often comes from a low battery, an aging pod, or tight airflow.
Step-by-step:
-
Fully charge the battery (watch the LED indicator).
-
Open the airflow slightly via the twist pod mechanism and test again.
-
Clean the pod’s metal contacts and the device’s pod connection area with a dry cloth.
-
If flavour is still flat, the pod is likely near end-of-life—replace the pod.
Burnt or harsh taste
A classic sign the wick is dry or the coil is finished.
Stop and fix:
-
Stop vaping immediately to avoid scorching the cotton wick.
-
Check the e-liquid level; if low, refill (ideally 50/50 VG/PG nicotine salt) or replace the pod.
-
If you just refilled, wait 10 minutes to re-saturate, then take a few gentle “primer puffs” without deep inhales.
-
Space out puffs (avoid chain vaping) to reduce heat stress on the mesh coil.
-
If harshness persists, the coil is done—swap the pod.
Leaking or gurgling
Leaks and gurgles are usually from overfilling or a loose seal.
Clear it up:
-
Remove the pod, wipe the mouthpiece, filling port, and magnetic connectors dry.
-
Hold a tissue at the mouthpiece and blow gently to clear flooded airways.
-
Refit the fill plug firmly; never fill beyond ~80% of the chamber.
-
Store the device upright; avoid hot cars or direct sun (heat thins e-liquid and causes leaks).
-
Persistent leaking = failing pod—replace it.
Pod not detected / LED error flashes
Some units flash (e.g., triple-flash) when the pod isn’t aligned.
Get recognition back:
-
Remove and reinsert the pod until it clicks—ensure magnets fully seat.
-
Clean both sides of the electrical contacts (device and pod).
-
Try a second pod to isolate the issue. If another pod works, discard the faulty one.
-
If no pod is detected at all, even after cleaning, contact support.
Auto-firing or device heating up
This is rare but important to handle safely.
Safety first:
-
Immediately remove the pod and place the device on a non-flammable surface.
-
Let it cool completely; do not inhale from a hot device.
-
Check for e-liquid inside the body—clean and dry thoroughly.
-
If auto-firing returns, stop using the device and seek a replacement.
Airflow too tight or too loose
Your draw can be tuned for comfort and flavour.
Dial it in:
-
Use small adjustments on the twist-to-switch/airflow ring—move in quarter-turns and test.
-
Ensure the mouthpiece and air path aren’t blocked (pocket lint is a common culprit).
-
Tighter airflow = warmer vapour and stronger throat hit; looser airflow = cooler, airier clouds.
Battery draining faster than expected
Heavy use, extreme temperatures, or deep discharges can shorten a session.
Improve runtime:
-
Recharge around 20–30% instead of fully draining (good for battery health).
-
Keep the device at room temperature; cold reduces output, heat ages cells.
-
Use a quality USB-C cable and standard adapter; unstable power hurts longevity.
-
Old pods can force the device to work harder—replace the pod if vapour is weak.
-
If runtime keeps shrinking after months of use, the cell may be aging—consult the retailer.
Flavour tastes “mixed” after switching
When using the twist-to-switch pod mechanism, you may need a couple puffs to transition.
Quick reset:
-
Twist fully until the detent/click—half turns can blend chambers.
-
Take 2–3 gentle purging puffs to clear residual vapour.
-
If flavour still blends, remove and reseat the pod, then try again.
LED indicator: quick reference
-
Pulsing while plugged in = charging in progress.
-
Solid / 100% indication = charged (unplug to protect the battery).
-
Rapid flash on inhale = pod/connection issue or low battery.
(Exact patterns can vary; check the user manual for your batch.)
When to replace the pod vs. the device
-
Replace the pod when flavour is weak, vapour is low, you taste burnt, or there’s persistent leaking despite proper fills. Also buy from trusted Sources like Ordervape,
-
Replace/return the device if it won’t charge after cable/adapter/port checks, won’t detect any pod, or shows auto-firing/overheating after cleaning.
FAQs About HQD Air Glow 70k Usage & Troubleshoot
1. How long does the HQD Air Glow 70k last?
The HQD Air Glow 70k vape kit is designed to deliver up to 70,000 puffs per device cycle. How long this lasts depends on your vaping habits—light users may get several weeks of use, while heavy vapers may need to refill or replace pods more often.
2. Can I use other e-liquids with the HQD Air Glow 70k?
Yes. The HQD Air Glow 70k pods are refillable, so you can use your preferred nicotine salt e-liquids. For best results, stick to a 50/50 VG/PG blend, which helps the coil and wick absorb liquid evenly and prevents dry hits. Avoid thicker liquids (high VG), as they can cause poor wicking and burnt taste.
3. How do I know when to refill or replace the pod?
Check the transparent pod reservoir regularly. If you see the liquid level drop below the coil intake holes, it’s time to refill. Signs that you need a replacement pod include weak flavour, low vapour production, or a burnt taste.
4. How do I switch flavours on the HQD Air Glow 70k?
This device uses a twist-to-switch pod mechanism. Simply twist the mouthpiece clockwise or anti-clockwise to change between flavours instantly. Take a couple of light puffs to clear any leftover vapour, then enjoy the new flavour.
5. How long does the battery last on one charge?
The HQD Air Glow 70k comes with a powerful rechargeable battery that can last a full day or more depending on usage. It takes about 45–60 minutes for a full charge using the USB-C fast charging port. Always unplug once the LED indicator light shows full charge to protect battery health.
6. Is the HQD Air Glow 70k good for beginners?
Yes. With its draw-activated firing system, prefilled/reusable pods, and simple twist mechanism, the HQD Air Glow 70k pod kit is very beginner-friendly. There are no complicated buttons or settings—just charge, insert the pod, and inhale.
7. What should I do if my HQD Air Glow 70k is leaking?
If you notice e-liquid leakage, wipe the mouthpiece and pod connection area dry, and make sure the pod is sealed properly. Avoid overfilling, and always store the device upright. Persistent leaks usually mean it’s time to replace the pod.